How to Prevent a Water Leak from Ruining Your Products
Letting a water leak go without addressing the issue can be very costly for your company. The longer it goes unchecked, the more likely you’re going to wind up with water damage. This can lead to ruined products, defective products and other things that are bad for your business. In this blog post we’ll go over prevention techniques you can use along with waterproofing solutions from a reliable waterproofing contractor Dubai that will help ensure the safety of your products and prevent the cost of a minor water damage problem from becoming a major one.
Invest in Waterproof Floors, Ceilings, and Walls
Water can be a problem in a warehouse, but it is also one of the easiest problems to fix. There are several waterproofing solutions available and all of them are inexpensive and easy to install. Do this in these ways:
Waterproof floors: These are the best way to prevent water from damaging your products. They are easy to install and will save you money in the long-run by preventing any water damage.
Waterproof ceilings: Another great option for keeping your warehouse dry. They provide an extra layer of protection against water damage and can be installed over existing drywall or plywood ceiling panels.
Waterproof walls: Offers a more permanent solution than other methods of waterproofing because they require less maintenance than other options such as linoleum or vinyl flooring or even carpeting. These walls are usually made out of concrete blocks that have been treated with plastic resin so they won’t absorb moisture over time and leak into your warehouse environment like wood would if left untreated.
Install a Metal Roof Waterproof Membrane
When it comes to the roof of your warehouse, you want to make sure that it is waterproof. This way, you can be sure that any water that comes in contact with your roof will not leak through and cause damage to any of the products stored inside. If you have a metal roof, there are some steps you can take to ensure that it is properly protected. One of these steps is installing a metal roof waterproof membrane.
What Is a Metal Roof Waterproof Membrane?
A metal roof waterproof membrane is a type of material that sits between the corrugated steel sheets on your warehouse’s roof and the concrete surface below it. This waterproofing solution keeps all moisture from penetrating through the steel sheets and seeping into your warehouse.
Why Should You Use a Metal Roof Waterproof Membrane?
There are many reasons why you should consult a contractor in metal roof waterproofing Dubai/UAE including:
- It prevents water from getting underneath the steel sheets and leaking into your building.
- It prevents rusting on the steel sheets by preventing moisture from getting through them.
- It is flexible and can be installed over any shape of roof – no matter how complex it is.
- It comes with a 15-year warranty for peace of mind when you buy this product for your warehouse roof.
Apply Waterproof Sealant to Concrete and Foundation Walls
Concrete is porous, meaning it absorbs water and allows it to seep into the ground below. This can damage your building’s foundation and weaken its structure over time. You can apply waterproof sealant on concrete to seal up any holes or cracks, preventing further moisture absorption.
Fixing Cat Ladder and Skylights
Cat ladders are often installed on the roof of warehouses for easy access for maintenance workers and employees. However, these ladders can become a source of leaks if they are not properly maintained or replaced when needed. Skylights are also another area where water can enter your warehouse. Skylights should be inspected regularly to make sure they are not leaking or cracked and then repaired or replaced as necessary.
Fabricating and Fixing of Flashing and Gutter For The Roof
Flashing is the necessary component for waterproofing of the roof. It is used to prevent water leakage from getting inside the building. Flashing is used to protect the ends of pipes or ducts that pass through a wall. It’s also used around windows and doors, where the walls meet the roof or a chimney or where two roofs meet at an angle. The flashing should be installed before any other work is done on your roof so that it doesn’t get damaged by construction crews working above it. If there’s already flashing in place, make sure that it’s not damaged before installing new flashing materials over top of them.
One can install a flashing system by themselves if they have knowledge about it, but it is better to hire an expert so that they could fix it properly. They will provide you with a warranty and they are also insured against any kind of accident while working on your roof. You can find many warehouse waterproofing professionals in your area who are ready to help you out with this work at an affordable cost.
Improve Your Warehouse Drainage System
The most common cause of water damage in warehouses is poor drainage systems. Water that accumulates on the floor can seep through cracks and holes in the foundation and cause structural damage to your building, but it also has the potential to ruin your inventory. A study by the Institute of Inspection Cleaning and Restoration Certification found that more than half of all water damage claims relate to flooding or leaks caused by faulty drainage systems.
A good way to prevent this type of damage is by installing an underground drainage system that runs along the walls of your building to collect any runoff before it can seep through cracks in the foundation.
Seal Concrete Floor Cracks with Epoxy Injection
One of the most effective methods for sealing up cracks in concrete is epoxy injection. This process involves injecting epoxy into cracks in order to seal them up. The epoxy fills up the crack and hardens over time, forming a semi-permanent barrier against water and moisture. Epoxy injections work well for small cracks that are less than an inch wide, but they aren’t appropriate for large cracks or holes that require more than one injection point each.
Epoxy injections are relatively inexpensive compared to other methods of sealing concrete cracks because they require no materials other than the epoxy itself, which comes in a kit that includes everything needed for the injection process (including disposable syringes).
Reinforce Any Windows and Doors
Make sure that all of your doors and windows have a tight seal around them. If there are any cracks in the seals, then you can purchase special gaskets to place over them. This will help keep out any moisture from entering through small cracks or spaces that are present around these areas.
Conclusion:
It’s better to make proactive moves such as purchasing Thermilate’s waterproofing coatings Dubai now to ensure that your goods remain adequately protected than to deal with the fallout of a leak later. Waterproofing is one of the best ways to protect your warehouse and prevent water leakage. The most important thing is to choose a waterproofing company with professional services and solutions, if you are looking for more information please contact us via email.
Contact us today for a FREE roof evaluation and get a detailed roof report from us. Our waterproofing team will inspect the roof home and provide you and provide you a working solution, including a written contract that spells out each detail for you, without any hidden agendas.